Sime HYBRID REVOLUTION 30 handleiding
Handleiding
Je bekijkt pagina 12 van 88
12
1.4 Fault / malfunction codes
If, during the operation of
HYBRID REVOLUTION 30
, an anomaly/
fault occurs, the display will show
“ALL”
followed by the anomaly
code.
If you see alarm
“02”
(low water pressure in the system):
– verify on the boiler display (1) and on the remote control dis-
play (2) that the pressure of the heating system, when cold,
is
1-1.2 bar
14:32
Anomaly in progress
2 - Low system pressure
&ŝůůƚŚĞƐLJƐƚĞŵĂĐĐŽƌĚŝŶŐƚŽƚŚĞŝŶƐƚƌƵĐƟŽŶ
manual and reset the appliance
P
Exit
@
Back
1 2
Fig. 26
– if not, open the filling valve (3) and refill the heating system
until the displays of the boiler (1) and of the remote control
unit (2) show a pressure reading of
1-1.2 bar
– close the filling valve (2)
– press and hold the button
y
for more than 3 seconds and
check whether normal operating conditions are restored.
3
1
Fig. 27
If you see alarm
“06”
(no flame detected) and
“07”
(safety ther-
mostat intervention):
–
press and hold the button
y
for more than 3 seconds and
check whether normal operating conditions are restored.
If this operation is not successful,
ONLY ONE MORE ATTEMPT
can
be made, therefore:
– close the gas isolation valve
– set the main system switch to "OFF"
– contact the Personale Tecnico Abilitato.
Fig. 28
m
CAUTION
Should you see an alarm not described here, contact a
qualified technical professional.
1.5 Rapid setting of the room temperature
The
[
and
]
can be used to directly modify the
“Set room”
parameter from the
“Main screen”
in
“WINTER mode”
.
10:4510:45
Hot water set 10°C
Winter Manual - Set 18.0°C
Fri 15 May 2024
Hot water set 10°C
Temporary - Set 18.0°C ll 14:45
Fri 15 May 2024
Fig. 29
In
“MANUAL mode”
the set value will be valid permanently; in
“AUTO mode”
the set value will only be valid until the subsequent
time band change.
12:12 12:12
Room Setpoint
Auto Manual
Room Setpoint
Fig. 30
Bekijk gratis de handleiding van Sime HYBRID REVOLUTION 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sime |
| Model | HYBRID REVOLUTION 30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16828 MB |
