Sime FUEL EV handleiding
Handleiding
Je bekijkt pagina 57 van 100
57
EN
To facilitate maintenance operations, secure the burner to the boiler by inserting the fixing screw (9) through the hole (12) on the foot.
Use one of the three square-shaped grooves on the foot to secure the burner rotated in the most suitable position for performing the
required maintenance operation.
BA C
12
B
A C
9
Position A:
– Inspection and cleaning
of the internal impeller, if
necessary.
Position B:
– Inspection of the combus
-
tion head
– Inspection and mainte-
nance of the nozzle
–
Inspection and mainte-
nance of the electrode
unit.
P
osition C:
–
Inspection and mainte
-
nance of the pump
–
Inspection and mainte-
nance of the coil
–
Inspection and mainte-
nance of the capacitor.
Fig. 37
POSITION A
6.2.1 Cleaning the impeller
Check that there is no dust inside the impeller as this could re-
duce the combustion performance. Perform maintenance oper-
ations while being careful not to damage the fan. Check that the
impell
er is pr
operly positioned inside the burner body.
Observe the following sequence:
– loosen the screws (1) and remove the air intake duct (2);
– clean the impeller (3) and the air duct using a paintbrush;
– if necessary, dismantle the impeller and mount it back on.
3
2
1
Fig. 38
Bekijk gratis de handleiding van Sime FUEL EV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sime |
| Model | FUEL EV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26611 MB |
