Silvercrest SRWK 800 A1 handleiding
Handleiding
Je bekijkt pagina 24 van 72
GB
│
IE
│
NI
│
21 ■
SRWK 800 A1
Pausing the alarm (SNOOZE function)
♦ Press the SNOOZE/DIMMER button 6 to pause the alarm
(alarm signal or radio) for about 9 minutes. You can repeat this
up to six times. Then the alarm switches off. While the alarm is
paused, the display flashes or and SNOOZE.
♦ If you press the │‒ 5 or the │+/MEM 7 button while
the SNOOZE function is active, the function is switched off and
the alarm is no longer active.
Switching off the alarm
♦ When the alarm sounds at the set time, press the /AMS 4 or
the │‒ button 5 for Alarm 1 or the │+/MEM button 7
for Alarm 2. The alarm stops and remains off for 24 hours.
NOTE
► If the alarm is not stopped manually, the device will automatical-
ly turn off the alarm after 60 minutes.
Switching the alarm on/off
♦ In standby mode, press the │‒ 5 or the │+/MEM 7
button to switch Alarm 1 or Alarm 2 on or off:
–
and/or
and the alarm time are displayed:
The alarm is switched on.
–
and/or and the alarm time are not displayed:
The alarm is switched off.
Timer alarm (NAP function)
Using the NAP function, you can set a timer alarm that will wake you
up with an alarm signal after 1–120 minutes.
♦ Press the SLEEP/NAP │12 / 24 button
8 for about 2 seconds.
NAP and 01 appear on the display
1.
♦ Press the SLEEP/NAP │12 / 24 button
8 repeatedly to set the
alarm time between 01 and 120 minutes. After approx. 3 sec-
onds, the normal display appears again and the NAP function is
started automatically. NAP appears on the top of the display 1.
Bekijk gratis de handleiding van Silvercrest SRWK 800 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SRWK 800 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4829 MB |
