Silvercrest SPPB 5000 A1 handleiding
Handleiding
Je bekijkt pagina 13 van 39
SPPB 5000 A1
■ 10 │ GB│IE│NI
Handling and use
Charging mobile devices with the power bank
♦ Insert the micro-USB plug on the charging cable into the
micro-USB charging port on the mobile device, and insert
the USB plug into the USB port
on the power bank.
♦ Press the ON/OFF button
to start the charging process.
NOTE
► After removing the lighting attachment
, you have the option
of charging a second device parallel to the first one. Keep in
mind that the capacity of the power bank diminishes faster
and the charging times become longer.
CAUTION
► If you charge two mobile devices simultaneously at the USB
ports (
+ ), the total power consumption of the two
mobile devices must not exceed 2.1 A.
♦ Press the ON/OFF button
for approx. 3 seconds to start
the charging process at the USB port
.
♦ During the charging process, the current charge level of the
power bank is shown via the charge level LEDs
(see table
in the section "Checking the charge level").
♦ To stop charging, disconnect the charging cable
from the
mobile device and the power bank. The charge level LEDs
switch off after about 30 seconds.
IB_286204_SPPB5000A1_DE-95x140_LB6.indb 10 24.05.17 16:26
Bekijk gratis de handleiding van Silvercrest SPPB 5000 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SPPB 5000 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2300 MB |
