Silvercrest SMZE 500 A1 handleiding
Handleiding
Je bekijkt pagina 10 van 63
8
GB
6.1 Assembling the multi
chopper
CAUTION:
~ Depending on the hardness and consist-
ency of the food, do not fill the contain-
er7 up to the MAX10 marking, as
this can cause the blade assembly6 to
become blocked. Pay attention here to
the guideline values for various foods in
section “Processing table”.
1. Place the container7 on the anti-slip
mat11.
2. Place the blade assembly6 on the
peg9 in the container7.
3. Fill the prepared food into the contain-
er7.
4. Place the working cover5 onto the con-
tainer7 in such a way that the blade
assembly6 protrudes a little through the
opening in the working cover5.
5. Figure A: place the motor unit4 onto
the working cover5. Rotate and jiggle
the motor unit4 back and forth a little
until it sits firmly on the blade assem-
bly6 and working cover5.
6. Insert the mains plug1 into a wall sock-
et corresponding to the technical data.
6.2 Chopping
WARNING! Risk of material damage!
~ The multi chopper is designed for a
maximum operating time of 30 seconds
without interruption.
After this, the device must remain
switched off until it has cooled down to
room temperature.
• Figure B: for chopping, hold down the
button I2 or the button II3.
• To switch off, release the pressed button
I2 / II3.
• Work using short pulses (1 pulse: press
for approx. 1 second).
The number and
length of the pulses will depend on the
quantity and consistency of the food. See
the specifications given in section “
Pro-
cessing table”.
• Repeatedly check the result. If the food
is not being chopped evenly:
- Release the button I2 / II3.
- Pull out the mains plug1.
- Thoroughly shake the container7.
- If food is sticking to the inside wall of
the container, remove the motor unit4
and the working cover5. Push the
pieces downwards using a spatula.
- Put all the pieces back together be-
fore you reinsert the mains plug1 into
a wall socket and resume processing.
6.3 Remove food and
disassemble the multi
chopper
1. Disconnect the mains plug1 from the
wall socket and wait for the standstill of
the blade assembly6.
2. Remove the motor unit4 and the work-
ing cover5.
3. Remove the blade assembly6 carefully
from the container7.
4. Remove the food, e.g. using a spatula.
5. Clean the device as soon as possible af-
ter use.
__326310_Multizerkleinerer_B6.book Seite 8 Montag, 19. August 2019 12:33 12
Bekijk gratis de handleiding van Silvercrest SMZE 500 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SMZE 500 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6538 MB |
