Silvercrest SLG 350 D2 handleiding
Handleiding
Je bekijkt pagina 8 van 40
GB
│
CY
│
5 ■
Overheating protection
This appliance is fitted with overheating protec-
tion. If the motor overheats due to overloading,
the appliance switches itself off automatically. In
this case, disconnect the power cable and wait
until the appliance has cooled down to room
temperature. You can then reconnect the plug to
a mains power socket and take the appliance
back into use.
We recommend that you let the appliance cool
down for about 30 minutes after 2 hours of
operation.
Package contents and
transport inspection
The appliance is supplied with the following
components as standard:
▯ 1 x laminator with attachable cutting
attachment
▯ 1 x corner rounder (stored in the appliance)
▯ 10 x laminating pouches DIN A4 for hot
lamination (80 micron)
▯ 10 x laminating pouches DIN A5 for hot
lamination (80 micron)
▯ 10 x laminating pouches for business
cards size 8.5 x 5.5 cm for hot lamination
(80 micron)
▯ These operating instructions
Note
► Remove the appliance, the laminating
pouches and the operating instructions from
the box.
► Remove all packaging materials and protec-
tive films from the device.
► Check the package for completeness and
signs of visible damage.
► If the delivery is incomplete or damage has
occurred as a result of defective packaging
or during transport, contact the Service
hotline (see section Service).
Appliance description
(See fold-out page for illustrations)
1
Cutting ruler
2 Selector switch for hot and cold lamination/
pouch thickness
3 Cutting rail
4
Cutting
head
5 Slot for manual pouch insertion (front)
6 Indicator light green ready (ready for use)
7 Indicator light red power (On/Off)
8 Corner rounder (can be stored in the
appliance)
9 Pouch output (rear)
0 On/Off switch I/O
q Anti-blocking switch
ABS
Technical data
Operating voltage 220–240 V ∼, 50 Hz
Current
consumption
1.6 A
Power
consumption
380 W
Protection class
II /
(double insulation)
Pouch width max. 230 mm
Pouch thickness
for hot lamination
max. 125 µm
Pouch thickness
for cold lamination
max. 200 µm
Cutting capacity
of the cutting
attachment
max. 3 sheets (80 g/m
2
)
or one laminated
document (80 µm)
IB_456368_SLG350D2_CY.indb 5IB_456368_SLG350D2_CY.indb 5 20.08.2024 10:42:2920.08.2024 10:42:29
Bekijk gratis de handleiding van Silvercrest SLG 350 D2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SLG 350 D2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3984 MB |
