Silvercrest SKMC 1200 C3 handleiding
Handleiding
Je bekijkt pagina 16 van 40
16
GB
CAUTION:
~ The mixer attachment21 must only be used with
speed settings 1 to 4.
~ The turbo button38 must not be pressed if the mixer
attachment21 is used.
~ When using the mixer attachment21, the spatula22
must not be used, since it might get into the mixer at-
tachment21.
~ When adding food, ensure that it will not block the
mixer attachment21.
In order to remove the mixer attachment21, pull it out up-
ward. If you feel resistance, turn it slightly.
10.5 Put on the lid of the blender jug
NOTE: the lid24 for the blender jug may only be put on
when the blender jug5 has been correctly inserted into the
base unit14. If you attach the lid first, the blender jug can
no longer be inserted into the base unit.
1. Place the lid24 for the blender jug so that the lock
symbols are opposite the arrows on the blender
jug5.
2. Press and turn the lid24 clockwise with both hands.
Only when the lid24 is correctly closed, can the de-
vice start. An audio signal indicates that the device is
ready for use.
NOTES:
• In order to facilitate the closing of the lid somewhat,
put a few drops of oil on a cloth and rub it on the
seal23.
• The device can only be started when the lid24 is put
on correctly.
10.6 Measuring beaker as lid for the
filling opening
Simultaneously, the measuring beaker25 is used to close
the lid of the blender jug5 and to measure ingredients
(20ml to 100ml).
• In order to close the blender jug5, place the measur-
ing beaker25 with the opening at the bottom into the
lid24 and lock it in place by turning it clockwise. It
clicks audibly.
CAUTION:
~ Prior to removing the measuring beaker25, you must
reduce the speed to setting 1, 2 or 3, so that no food
can be ejected.
• In order to fill in ingredients, the measuring beaker25
can be removed briefly.
• To measure ingredients, turn the measuring beaker25
upside down and fill in the food. The values can be
read in ml.
10.7 Cooking and steaming with the
cooking pot
1. Fill at least 500 ml
of water into the blender jug
5
.
Only fill so much water into the blender jug
5
that the
maximum filling volume of 3 litres will not be exceeded
when the food is added.
- If the entire food is covered by water, it will be
cooked.
- If the food is not completely covered by water, it will
be steamed.
2. Fill food into the cooking pot20.
NOTE: always make sure that the filling level does not ex-
ceed the marking MAX.
3. Place the cooking pot20 into the blender jug5.
4. Close the blender jug5 with the lid24 and the
measuring beaker25.
5. Use the on/off switch7 to switch the device on.
6. Use the display dial29 to set the desired time.
7. Set the desired temperature on the display dial32,
e.g. 100 °C for cooking.
The touchscreen8 shows the time set and the selected tem-
perature.
8. Select the speed setting 1 for an even distribution of
the heat in the water.
9. Press the
X 35 button. The device starts to operate.
10. After the set time has elapsed, a signal sounds.
11. Press the on/off switch7 to switch the device off.
00:53 3 75
°C
0
__338924_1907_MC-Connect_GB_online.book Seite 16 Donnerstag, 12. Dezember 2019 10:09 10
Bekijk gratis de handleiding van Silvercrest SKMC 1200 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SKMC 1200 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6628 MB |
