Silvercrest SKM 48 A1 handleiding
Handleiding
Je bekijkt pagina 10 van 28
GB
│
IE
│
NI
│
7 ■
Use
1) Press the ON/OFF button5
to switch
on the appliance.
The temperature flashes in the display 2.
NOTE
► During initial setup or after the appliance
has been without power, the factory set
temperature of 10 °C always flashes in the
display 2. Otherwise, the most recently set
temperature flashes in the display 2.
2) To set the temperature, press the SET
button 4.
NOTE
► As long as the temperature is flashing in
the display 2, you can also set the temper-
ature directly without first pressing the SET
button 4.
3) Press the temperature setting button 3
or until the desired temperature is shown
in the display 2.
4) Wait about 6 seconds until the display 2
stops flashing. The setting has now been
saved. The fan e begins to run. The oper-
ating indicator w lights up. The display 2
shows the current temperature inside the
appliance.
NOTE
► You can select a temperature setting
between 4°C and 16°C.
5) If you no longer wish to use the appliance,
switch it off by pressing
the ON/OFF
button
5
for about
3 seconds. The
operating indicator w goes out. The fan e
continues to run for a few seconds and then
stops.
6) Unplug the power plug from the mains outlet
or the vehicle adapter from the cigarette
lighter.
Tips for optimal use
■ The temperature in the refrigerator and the
duration until the set temperature is reached
depend on the outside temperature. The ap-
pliance operates more effectively in a cool
environment between 18°C and 25°C.
■ The temperature regulation enables cooling
to 15 °C ± 3°C below the ambient temper-
ature. The coldest temperature is present in
the lower part of the refrigerator.
■ Ensure that the appliance is always well
ventilated. Do not operate the mini refrigera-
tor in spaces with poor air circulation, such
as in the luggage compartment.
■ To ensure an optimal cooling result, maintain
at least 10 cm of clear space behind the
appliance. Make sure that the fan e is not
blocked and the ventilation openings r
are not blocked or covered.
■ Avoid direct sunlight as this will reduce the
cooling efficiency.
■ To ensure that the refrigerated articles are
cooled more quickly and remain cool for
longer, they should be pre-cooled before
placing them into the mini refrigerator.
■ Do not open the mirror door 6 more often
than necessary, and only open it briefly.
Always ensure that it is closed properly. The
door handle 7 must click audibly into place.
■ If you operate the appliance in a vehicle
using the 12V vehicle adapter, only allow the
appliance to operate while the engine is also
running in order to spare the vehicle battery.
■ During operation, condensation forms on
the inside wall of the refrigerator. Wipe off
this condensation every 1-2 days so that it
cannot collect on the floor and flow out.
■ You can remove the grate shelf 9 to store
taller containers.
■ If you wish to cool medications, check
whether the cooling capacity of the appli-
ance satisfies the requirements of the respec-
tive medication.
Bekijk gratis de handleiding van Silvercrest SKM 48 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SKM 48 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2293 MB |
