Silvercrest SEMP 2000 A1 handleiding
Handleiding
Je bekijkt pagina 24 van 134
22
GB
could attack and soften the non-slip plas-
tic feet. If necessary, place a non-slip mat
under the device.
~
If you want to fry at the table, please note
that splashes of fat can damage the ta-
ble, the tablecloth and clothing.
4. Items supplied
1 electric pan7
1 power cable with mains plug4
including plug with thermostat5
1 glass lid3
Individual parts for the lid handle2:
1knob11
1 upper plastic ring12
1 lower plastic ring13
1 plastic seal15
1washer16
1screw17
1 copy of the user instructions
5. How to use
5.1 Unpacking
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
5.2 Assembling the lid
handle
1. Figure B: assemble the individual
parts for the lid handle2 as shown.
Make sure that the upper plastic
ring12 and the lower plastic ring13
fit into each other.
2. Carefully tighten the screw17 with a
Phillips screwdriver. The lid handle2
must sit securely on the lid3 without
wobbling.
NOTE: do not overtighten the screw17 in
order to ensure that the glass lid3 is not un-
der tension.
Figure C: the fully assembled lid handle2.
5.3 Switching on for the first
time
FIRE HAZARD!
~ Before switching on the device, place it
on a heat-resistant, flat and stable sur-
face.
~ The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls. In order to prevent overheat-
ing of the device or a potential fire, the
device must not be covered.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is related to materials
used on the heating elements during assem-
bly, and is not a product defect. Ensure ade-
quate ventilation. The device can be heated
up for the first time without the lid.
1. Clean the device prior to first
use!
2. Before connecting the device, make sure
that the thermostat control9 is set to
OFF. The arrow on the temperature con-
trol light10 must point to OFF.
3. Figure D: insert the plug with thermo-
stat5 into the socket6 as shown.
4. Insert the mains plug4 into an earthed
wall socket corresponding to the specifi-
cations of the rating plate.
5. Turn the thermostat control9 to tempera-
ture setting 5. The device heats up and
the temperature control light10 is lit.
When the temperature setting is
reached, the light goes out.
6. Switch the device off after approx.
10 minutes by turning the thermostat
control9 to OFF.
7. Pull out the mains plug4.
8. Let the device cool down before mov-
ing, cleaning and storing it away.
__383186_elektr_Pfanne_B8.book Seite 22 Freitag, 1. April 2022 9:11 09
Bekijk gratis de handleiding van Silvercrest SEMP 2000 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SEMP 2000 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13642 MB |
