Silvercrest SEAD 1800 B2 handleiding
Handleiding
Je bekijkt pagina 9 van 162
■ 6
│
GB
│
IE
Setting up and
connecting to the mains
powersupply
Unpacking
♦ Remove all parts of the appliance and the
operating instructions from the packaging.
♦ Remove all packing material.
Appliance set up and making
ready for use
♦ Completely unwind the power cable from
the cable storage 8.
♦ Place the appliance on a level and slip-free
surface. Ensure that a mains power socket is
easily accessible.
♦ Clean the appliance as described in the
chapter “Cleaning and Care”.
♦ Insert the plug into a mains power socket.
The display lights up, a signal tone is heard.
ATTENTION! PROPERTY DAMAGE!
► NEVER operate the appliance in a no-load
condition! The appliance could be irrepara-
bly damaged!
WARNING! RISK OF INJURY!
► When it is hot, take hold of the appliance
ONLY by means of the heat insulated
handles 2. Risk of Burns!
♦ Add about 5 litres of water to the appliance
and leave it to boil at 100°C for 20min-
utes (see section “Switching the appliance
on and off”). After the water has boiled,
pour it away.
Note
► On the first use the generation of a slight
smell may occur, this is due to residues from
the production. It is completely harmless
and disperses after a short time. Provide for
sufficient ventilation, for example, open a
window.
Preparing food/
preserve jars
Preferably use preserving jars with a rubber seal
and a lever clamp. The preserving jars must be
free of damage.
1) The preserving jars must be free of germs
and bacteria, otherwise the preserve could
spoil prematurely. Preferably, boil the pre-
serving jars for 5 –7 minutes before adding
the food.
2) Use a funnel when filling the preserving jars,
if available. The edges of the preserving jars
must be clean when the jars are sealed.
3) Seal the jars as quickly as possible after
filling:
– Place the rubber seal on the upper rim of
the preserving jar and place the glass lid
on the preserving jar. The rubber seal is
between them.
– Fasten the glass lid with the clamps: Fit
the locking clamps opposite each other.
The preserving jars are now ready for preserving.
Using the appliance
Switching the appliance on
and off
1) Using the control dial “Temperature” 9,
set the desired temperature. You can set the
temperature in 1°C steps. A signal tone
sounds for every 5°C. The set tempera-
ture appears in the display indicator “Set
Temperature” 7.
2) Using the control dial “Minutes” 3 set the
desired cooking time in minutes. You can
set the time in 1 minute steps. A signal tone
sounds for every 5 minutes. The set time ap-
pears in the display indicator “Minutes” 5.
IB_472575_SEAD1800B2_LB8.indb 6 11.10.2024 11:44:29
Bekijk gratis de handleiding van Silvercrest SEAD 1800 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SEAD 1800 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14639 MB |
