Silvercrest SEAD 1800 B2 handleiding
Handleiding
Je bekijkt pagina 10 van 162
GB
│
IE
│
7 ■
Note
► The background lighting of the display
goes out after about 5 minutes after the
last activation of one of the dials if you do
not start the heating process. The settings
on the display remain visible. Turning one
of the dials will reactivate the background
lighting in the display.
3) Press the START/STOP 9 heating button.
The heating begins. The heating progress in
indicated through the continous beam
“
”. The momentary heating tempera-
ture is shown in the display indicator “Cur-
rent Temperature” 6. Once the heating up
is complete, signal tones sound, “
”
appears in the display and the time set in
the display indicator “Minutes” 5 begins to
count down.
Note
► The background lighting in the display
remains switched on while the appliance is
working.
As soon as the set time period has expired, sig-
nal tones sound. The appliance switches itself off.
“
” and “ ” extinguish in the display.
Note
► To stop a heating process or a boiling
process, press the heating START/STOP9
button.
4) When the appliance is not in use, ALWAYS
remove the plug from the mains power
socket.
Preserving
Note
► To be understood under the term preserving
is the conservation of foodstuffs by, amongst
others, the effects of heat. Dependent upon
the type and mass of the items to be pre-
served, a differentiation is made between the
processes of sterilisation and pasteurisation.
In sterilisation, the items to be preserved are
heated to a temperature of at least 100°C.
With pasteurisation, the heating tempera-
ture lies at around 80°C. For domestic
purposes, pasteurisation is sufficient.
For this, one needs the appropriate preserving
jars, with screw-tops or lids with rubber rings.
Note
► Preserve only fresh foods. Overripe fruits or
vegetables are not suitable for preserving.
► Pay heed to the cleanliness of the jars! Ideally,
boil the jars for around 5 –7minutes before
filling them with foodstuffs. This will ensure all
germs and bacteria have been killed.
► Ensure that the preserving grill 4 does not
come into contact with foods.
1) Place the preserving grill 4 in the preserv-
ing boiler. Ensure that the preserving grill 4
does not come into contact with the tempera-
ture sensor inside the appliance.
2) Place the filled and tightly sealed jars on the
preserving grill 4. Stack the preserving jars
on top of each other if required.
3) Add water to the preserve maker until the
upper preserving jars are around 3/4 covered.
However, do not exceed the MAX marking. En-
sure that the preserving jars on the lower level
are properly closed so that no water can get in.
4) Close the preserving boiler with the lid 1.
IB_472575_SEAD1800B2_LB8.indb 7 11.10.2024 11:44:29
Bekijk gratis de handleiding van Silvercrest SEAD 1800 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SEAD 1800 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14639 MB |
