Silvercrest SABD 3.7 LI D4 handleiding
Handleiding
Je bekijkt pagina 20 van 74
SABD 3.7 LI D4 GB
│
IE
│
17 ■
Storage
ATTENTION! PROPERTY DAMAGE!
► Ensure that the appliance is switched off
before putting it away. Otherwise the battery
could be damaged by excessive discharging.
■ Store the cleaned appliance in a clean, dust-free
and dry place.
Troubleshooting
The appliance will not start.
■ The battery is discharged. Recharge the
appliance.
■ The appliance is defective. Contact the
Customer Service department.
The rotary brush z generates loud
noises when turning.
■ The rotary brush z is dirty. Clean the rotary
brush z.
■ The rotary brush z is not inserted correctly.
Check that the rotary brush z is correctly inserted
and correct the installation if necessary.
Technical data
Charger
Input: 100 – 240 V ∼ (alternating
current), 50/60 Hz, 0.3 A
Output: 5.3 V
(DC), 500 mA
Type designation: ZD006C053050EUE
Nominal ambient
temperature (ta) 40 °C
Manufacturer: E-TEK Electronics
Manufactory Co., LTD
Protection type: IP 20 Protected against
ingress of solid foreign
objects with a diameter
of
>
12.5 mm.
symbols used
Protection class II
(double insulation)
Polarity of the barrel plug
v
Efficiency class 5
Cordless sweeper
Input: 5.3 V
500 mA
Battery working
voltage: 3.7 V
Battery: lithium ion battery
1 x 3.7V, 2200mAh
Polarity:
Charging time with
empty battery: 5 hrs.
Operating time with full battery charge (depending
on floor covering): approx. 70 min.
Bekijk gratis de handleiding van Silvercrest SABD 3.7 LI D4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SABD 3.7 LI D4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7089 MB |
