Silvercrest HG06892N-BS handleiding
Handleiding
Je bekijkt pagina 14 van 27

12 GB/IE/NI/CY
Ending ironing
1. Turn the temperature control [] counter-
clockwise all the way to MIN.
2. Set the steam control
[4] to the (no
steam) position. Set down the product with
the base
[8] on an even, stable surface.
3. Disconnect the mains plug
[7] from the
socket-outlet.
4. Let the product cool (this takes approximately
15 minutes). Do not leave the product
unattended while it is still hot.
5. To prevent limescale build-up, empty the
water tank after each use. To do so, open
the lid of the fill opening
[3]. Empty the
water tank via the fill opening
by holding
the iron upside down over a sink.
Additional product features
Anti-drip system
o The product features an anti-drip system.
This prevents water from exiting from the
soleplate
[1] as long as the temperature
is too low to produce steam. This feature
prevents water stains on your clothing.
Anti-lime filter
Do not use any additives. Additives may
damage the water filter.
o The product features an anti-lime filter. This is
a permanent water filter. It is not in need of
replacement or maintenance.
Cleaning and care
DANGER! Risk of electric shock!
Always disconnect the mains plug
[7] from
the socket-outlet before cleaning the product.
m
WARNING! Do not immerse the product’s
electrical components in water or other
liquids. Never hold the product under
running water.
Do not let any water or other liquids enter
the product interior.
Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product.
1. Wipe down the product with a slightly damp
cloth.
2. Clean the soleplate
[1] using a damp cloth
and a mild, non-scouring detergent.
3. Let all parts dry completely after cleaning.
Self-cleaning function
DANGER! Risk of electric shock!
Always disconnect the mains plug
[7] from
the socket-outlet before filling the water tank.
o The product features a self-cleaning function
to remove filth and limescale build-up in the
steam channels.
o Use the self-cleaning function at least twice
per month.
o If you use tap water: Use the self-cleaning
function after every use.
1. Before filling water into the water tank: Set
the steam control
[4] to the (no steam)
position.
2. Open the lid of the fill opening
[3].
Never fill the water tank past the max
mark
[].
3. Turn the temperature control
[] counter-
clockwise all the way to MIN.
4. Plug the mains plug into an appropriate
socket-outlet.
5. Set the temperature control to the highest
temperature (turn clockwise all the way).
6. Set the steam control to maximum steam
power.
7. Wait for the product to heat up and the
control light
[9] to go off.
8. Hold the product horizontally over a sink.
9. Press and hold the self-cleaning button
[]
until no more steam or boiling, soiled water
exits the product.
10. Empty the water tank of any residual water
via the fill opening
.
Bekijk gratis de handleiding van Silvercrest HG06892N-BS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Silvercrest |
Model | HG06892N-BS |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2051 MB |