Silk'n Tightra H2400 handleiding
Handleiding
Je bekijkt pagina 20 van 82
6. Remove the device, and wipe the external skin around the
vagina with a clean dry towel, or wipes specifically for the
vaginal area, to remove any gel residue.
a
In cases of pain or discomfort:
y If you are using the high or regular energy levels,
reduce the energy by pressing the control button
(#3) 1 or 2 times. Wait 5 minutes for the heat to reduce.
y If you are already using the low energy level, remove
the device and wait until you feel OK before using the
device again.
a
After your rst treatment: Perform the 20 minute
treatment at the highest energy level that is comfortable
for you.
9.3 External mode treatment
Before use, the skin should be shaven, clean, dry and free of any
powders, antiperspirants or deodorants. Also, be sure that the
skin is not red or inflamed.
1. Apply a small amount of the gel supplied with the
device to the 3 silver-colored electrodes (#5, #6). There
is no need to apply gel internally.
2. To start external mode treatments, long press the control
button (#3) and then short press it 3 times. The treatment
mode indicator light (#2) will be constant white. The
device is now ready for use.
3. Lie down and make yourself comfortable.
4. Hold the base of the device and place the 3 silver-colored
electrodes (#5, #6) on the labia. The triangular shape of the
side with the silver-colored electrodes (#5, #6) will help you
position the device correctly.
EN
18
Bekijk gratis de handleiding van Silk'n Tightra H2400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silk'n |
| Model | Tightra H2400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4801 MB |
