Silk'n Tightra H2400 handleiding
Handleiding
Je bekijkt pagina 19 van 82
9.2 Internal mode treatment
1. Apply a small amount of the gel supplied with the device
to all the electrodes (#5, #6). There is no need to apply gel
internally.
2. Start internal mode treatments using the low energy
setting. Long press the control button (#3) once. You will
feel a vibration, and the device is now ready for use.
a
During the treatment, you will feel a vibration approximately
once a minute.
3. Lie down on your back and make yourself comfortable.
4. Insert the electrodes (#5, #6) into the vagina as far as is
comfortable for you. When the device is inside the vagina
you need to make sure that the device is supported during
treatments:
y If your legs are splayed out on the bed, close your legs
slightly to hold the device in place.
y If you lie with your legs bent (and feet on the bed),
place a cushion under the device to hold the device
in place.
y You might also wish to hold the device, if you find that
helps to keep the device in place.
a
If after 5 minutes you feel comfortable with the heat, move
to the regular energy level by short pressing the control
button (#3). To use the high energy level, short press the
control button (#3) one more time.
5. Keep the device in place for 20 minutes. We recommend
that you lie still and do not move about. However, it’s good
to rotate the device from time to time so that the energy
keeps flowing across the electrodes (#5, #6). After 20
minutes the device will auto shutdown.
EN
17
Bekijk gratis de handleiding van Silk'n Tightra H2400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silk'n |
| Model | Tightra H2400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4801 MB |
