Signature SKSHI4801S handleiding
Handleiding
Je bekijkt pagina 13 van 52
13TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
Before Calling for Service
Parts and Features
Problem Possible Cause & Solution
After installation,
the appliance
doesn’t work.
The power source is not turned ON.
• Make sure the circuit breaker and the appliance’s power is ON.
The power cord and the cable locking connector are not connected properly.
• Make sure the power cord is properly connected to the appliance.
Lights work, but
blower is not
turning.
The thermally protected system detects if the blower is too hot to operate and shuts
the blower down.
• The blower will function properly after the thermally protected system cools down.
The appliance is
vibrating.
The blower is not securely in place.
• Tighten the screws holding the blower in place.
Damaged blower wheel
•Call a SIGNATURE KITCHEN SUITE Customer Information Center at 1-855-790-6655
(U.S.A.) or 1-888-289-2802 (Canada).
The appliance is not secured in place.
• Check the installation of the hood.
The blower is
working, but the
lights are not.
The LED light connector is disconnected or the LED light is defective.
•Call a SIGNATURE KITCHEN SUITE Customer Information Center at 1-855-790-6655
(U.S.A.) or 1-888-289-2802 (Canada).
The speed levels of
the blower sound the
same.
Using the wrong size of ducting
• Change the ducting to at least 8" round or 3-1/4" x 10" rectangular for single blower or 10"
round for dual blower.
The hood is not
venting out properly.
The hood might be hanging too far above the cooktop.
• Adjust the distance between the cooktop and the bottom of the hood to within 26" to 36".
The wind from the opened windows or opened doors in the surrounding area are
affecting the ventilation of the hood.
• Close all windows and doors to eliminate the outside airflow.
Blockage in the duct opening or ductwork.
• Clear any blockages from the ductwork or duct opening.
The direction of duct opening is against the wind.
• Adjust the duct opening direction.
Using the wrong size of ducting.
• Change the ducting to the correct size.
Baffle filter is
vibrating.
Baffle filter is loose.
• Adjust or change the filter.
The appliance turns
on by itself.
A spotlight or kitchen lamp is shining directly onto the switch controls.
• The switch controls are light sensitive. A light source aimed directly at the switch controls
may disrupt switch functions.
en-us_main.book.book Page 13 Tuesday, March 19, 2024 12:52 PM
Bekijk gratis de handleiding van Signature SKSHI4801S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Signature |
| Model | SKSHI4801S |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5793 MB |
