Handleiding
Je bekijkt pagina 33 van 148
33
ENGLISH
LEVELING
Once the appliance is aligned properly in the enclosure, level it using the front and rear leveling
legs.
1. Use a Phillips screwdriver to extend the front and rear leveling legs until they are in firm
contact with the floor.
2. Turn the screws as shown above to raise the appliance. Turn the screws in the opposite
direction to lower the appliance.
3. Make sure the weight of the refrigerator is carried on the legs, not the wheels.
4. Use a smartphone leveling app or place a carpenter's level on the top and sides of the
appliance to check that it is level and plumb. Or use the provided gauge tool to measure the
distance of the bottom edge of the appliance from the floor at the front corners.
WARNING
To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with
the floor.
CAUTION
- If using a power drill, use the lowest torque setting.
- Leave at least 3/8 inch (10 mm) between the top front of the appliance and the top of the
enclosure to fit the top filler strip.
- Do not exceed 20 inch-pounds (2.25Nm) of torque.
- 20 revolutions equal 1/16”(2mm) of height adjustment.
Leveling
Bekijk gratis de handleiding van Signature SKSCW181RP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Signature |
| Model | SKSCW181RP |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15733 MB |
