Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 34 van 52
6.6.2.5. Slave
In this submenu you can set the device as a slave device in a master/slave setup.
01) Touch the UP/DOWN buttons to select one of the 2 options:01)
• Yes: The device is set as a slave and reacts the same as the master device•
• No: The device is set as the master device•
02) Touch the ENTER button to confirm the selection..02)
Note:
In a master/slave setup, make sure that only one device is set to master device and the remaining devices are
set to slave devices. All slave devices follow the master device.
6.6.3. Setup
In this menu you can adjust the settings of the device.
01) Touch the UP/DOWN buttons to scroll through the 19 available options:01)
• Pan Invert:
Invert the pan direction automatically, depending on the position of the device
•
(ON/OFF)
• Tilt Invert:
Invert the tilt direction automatically, depending on the position of the device
•
(ON/OFF)
• Dim Curve
(see 6.6.3.1. Dimmer Curve)
•
• PWM
(see 6.6.3.2. PWM)
•
• Tilt Range:
Set the tilt range (280°/360°)
•
• DMX Fail
(see 6.6.3.3. DMX Fail)
•
• Fan
(see 6.6.3.4. Fan)
•
• BO. P/T Move:
The device will black out the light output when Pan/Tilt are active (NO/YES)
•
• Pan Tilt Reset:
Reset the pan/tilt (NO/YES)
•
• Color Reset:
Reset the color wheel (NO/YES)
•
• Gobo Reset:
Reset the gobo (NO/YES)
•
33
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
