Showtec Titan FLEX FX Controller handleiding
Handleiding
Je bekijkt pagina 23 van 52
5.4.6. Universe Numbering
If you want to connect 5 or more devices on one data link and use them in 88-channel mode, you need to
address the devices on different universes.
01) Set the DMX starting address of the first 5 devices (see 5.3.5. DMX Addressing on page 19).01)
02) Set the universe number of the 6th device to 001 and the DMX starting address to 001.02)
03) Continue addressing the devices, each time increasing the universe number, after you reach the limit of03)
512 channels in one universe.
There are 512 channels (1–512) in one universe. 16 consecutive universes (0–15) make up one sub-net. 16 sub-
nets (0–15) make up one net. There are 128 nets (0–127) in total.
Note:
• In Art-Net, universes are called Port Address and number from 0 to 32767. There are 32768 unique numbers.•
• In sACN, universes number from 1 to 63999.•
15-bit
Port Address
Net
(0–127)
Sub-net
(0–15)
Universe
(0–15)
0 0 0 0
1 0 0 1
2 0 0 2
... ... ... ...
15 0 0 15
16 0 1 0
17 0 1 1
... ... ... ...
31 0 1 15
32 0 2 0
33 0 2 1
... ... ... ...
255 0 15 15
256 1 0 0
257 1 0 1
...
... ... ...
32766 127 15 14
32767 127 15 15
When addressing multiple devices on one data link, make sure that there are no overlapping channels. You
cannot control devices individually if they have overlapping channels.
Note:
If you use an Art-Net controller that supports Art-Net I or Art-Net II, you need to set the Art-Net net to 0. The net
number is available in Art-Net 3 and higher versions of the Art-Net protocol.
22
c
Product code: 40306
Controller for Titan Strobe FLEX FX
Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Titan FLEX FX Controller |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6501 MB |
