Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

5.4.3. Art-Net/sACN Linking

To connect multiple devices on one Art-Net/sACN data link, follow the steps below:

01) Use a CAT-5E/CAT-6 cable to connect the RJ45 connector of the computer/lighting controller to one of the01)

RJ45 connectors of the 1

device.

02)

Connect the 2

RJ45 connector of the 1

device to the 1

RJ45 connector of the 2

device with a

02)

CAT-5E/CAT-6 cable.

03)

Repeat step 2 to connect all devices in a daisy-chain.

03)

Figure 12

5.4.4.

Art-Net Settings

To operate the device using Art-Net protocol:

01)

Configure the network address of your computer/lighting controller in the correct range (IP 2.x.x.x, 10.x.x.x

01)

or 192.168.x.x and Subnet 255.0.0.0). You can configure the IP address and Subnet mask of the device

Network Configuration menu (see 6.6.2. NetWork Configuration on page 28). Make sure that all devices in

the network have unique IP addresses.

02)

Enable Art-Net Protocol in the ArtNet Enable submenu (see 6.6.2. NetWork Configuration on page 28).

02)

03)

Set the universe in the ArtNet Universe submenu (see 6.6.2. NetWork Configuration on page 28). For more

03)

information refer to Universe Numbering (see 5.4.6. Universe Numbering on page 22).

5.4.5. sACN Settings

To operate the device using sACN protocol:

01) Set the IP address of your computer/lighting controller. sACN does not have restrictions on the IP address.01)

02) Enable sACN protocol in the sACN Enable submenu (see 6.6.2. NetWork Configuration on page 28).02)

03) Set the universe in the sACN Universe submenu (see 6.6.2. NetWork Configuration on page 28). For more03)

information refer to Universe Numbering (see 5.4.6. Universe Numbering on page 22).

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.