Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

4.4. Rigging

CAUTION

Restrict the access under the work area during rigging/derigging.

You can position the controller on a flat surface or mount it to a rigging structure (see 4.4.1. Installation with a

Clamp) or to a flat surface (see 4.4.2. Installation on a Flat Surface).

Make sure that all loads are within the pre-determined limits of the supporting structure.

4.4.1.

Installation with a Clamp

You can mount the controller to a rigging structure in 2 ways:

•

With a quick-lock bracket and a clamp, using the 2 mounting holes for a quick-lock bracket (06)

•

With a clamp, using the threaded insert M10 (07) or the 2 mounting holes, Ø 12,5 mm (03)

•

To mount the controller to a rigging structure:

01)

Fasten the quick-lock bracket on the mounting holes for a quick-lock bracket(06). Do not do step 1 if you

01)

install the device without a quick-lock bracket.

02) Attach the clamp to the quick-lock bracket or to the threaded insert M10 (07). Make sure that you use a02)

clamp suitable for attaching the controller to a truss.

03) Attach the controller to the supporting structure. Make sure that the controller cannot move freely.03)

04) Secure the controller with a secondary suspension, for example a safety cable. Make sure that the04)

secondary suspension can hold 10 times the weight of the controller. If possible, the secondary suspension

should be attached to a supporting structure independent of the primary suspension. Put the safety cable

through the safety eye (04).

Figure 5

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.