Showtec Sonus Bar 4B handleiding
Handleiding
Je bekijkt pagina 26 van 44
6.7.5.8. Default Factory Settings
In this submenu you can reset the settings of the device to the default factory settings.
01) Press the UP/DOWN buttons to select one of the 2 options:01)
• Yes: Reset to default factory settings•
• No: Keep current settings, no factory reset•
02) Press the SET button to confirm the selection.02)
6.7.6. Info
In this menu you can view the firmware version and the operating hours of the device.
01) Press the UP/DOWN buttons to select one of the 3 options:01)
• Firmware Version: Shows the current firmware version•
• Fixture Hours: Shows the operating hours of the device•
• Battery Percentage: Shows the current battery percentage•
02) Press the SET button to confirm the selection.02)
6.7.7. DMX Mode
In this menu you can set the starting DMX address of the device.
01) Press the UP/DOWN buttons to set the starting DMX address of the device. The selection range is d001–d512.01)
02) Press the SET button to confirm the selection and to open the submenu where you can set the channel02)
mode of the device.
03) Press the UP/DOWN buttons to select the DMX channel mode of the device. There are 7 options available:03)
• 4-ch: 4 CH (RGBW)•
• 16.ch: 16 CH (Pixel)•
• 6A.ch: 6 CH (Basic)•
• 18.ch: 18 CH (Extended)•
• 6b.ch: 6 CH (Auto)•
• 10.ch: 10 CH (Basic Auto)•
• 22.ch: 22 CH (Extended Auto)•
04) Press the SET button to confirm the selection. For more information about DMX channels, refer to DMX04)
Channels (see 6.9. DMX Channels on page 31).
25
c
Product code: 41275
Sonus Bar 4B
Bekijk gratis de handleiding van Showtec Sonus Bar 4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Sonus Bar 4B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4374 MB |
