Showtec Phantom 180 Wash handleiding
Handleiding
Je bekijkt pagina 18 van 32
17
Ordercode: 40032
Phantom 180 Wash
Color Balance
In this menu you can set the initial color brightness of the Phantom.
01) Once you have chosen COLOR BALANCE, press the ENTER button to open the menu. The display will
show:
02) The available colors are:
● Red: Set the initial Red dimmer brightness.
● Green: Set the initial Green dimmer brightness.
● Blue: Set the initial Blue dimmer brightness.
● White: Set the initial White dimmer brightness.
03) Press the UP/DOWN buttons to choose the color which you would like to adjust.
04) Press the ENTER button to open the menu.
05) Press the UP/DOWN buttons to set the brightness. The adjustment range is between 100–255, from
dark to brightest.
06) Press the ENTER button to save changes.
System Information
In this menu you can see the currently active mode, the DMX starting address, the current software
version and the temperature of the device.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu and view the parameters.
Bekijk gratis de handleiding van Showtec Phantom 180 Wash, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Phantom 180 Wash |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5657 MB |
