Showtec Performer Fresnel 2200 DDT handleiding

Verlichting

Showtec

40 pagina's

PDF beschikbaar

Handleiding

6.6.6.2. DMX Error

In this submenu you can determine the behavior of the device in case there is no DMX signal.

01) Press the UP/DOWN buttons to select one of the 2 options:01)

• SAVE: The device uses the last DMX signal received correctly•

• BLACK: The device blacks out the light output•

02) Press the ENTER button to confirm the selection.02)

6.6.6.3.

Reset

In this submenu you can reset the device to the factory settings.

01) Enter the password (see 6.4.1. Password Input on page 22).01)

02) Press the ENTER button to confirm the password. When the screen shows 'OK!', the device is reset.02)

6.6.6.4. Zoom

In this submenu you can select a zoom limit.

01)

Press the UP/DOWN buttons to select one of the 3 options:

01)

• BASE:

The zoom limit is set to the standard zoom settings (15°–60°)

•

• POS1: The zoom limit is set to the Pos1 setting (see 6.6.7. Calibration on page 29)•

• POS2: The zoom limit is set to the Pos2 setting (see 6.6.7. Calibration on page 29)•

02) Press the ENTER button to confirm the setting.02)

6.6.6.5. Perform

In this submenu you can select the performance mode with regard to noise and light output.

01)

Press the UP/DOWN buttons to select one of the 3 options:

01)

• LIVE:

Balanced mode (default). The device operates with a compromise between

•

noise and light output

• STUDIO:

Low-noise mode. The fans do not turn on. Instead, the device reduces the light

•

output to cool down

• POWER:

Light output mode. The device gives the highest quality light output. The fans turn

•

on to high speed when it is necessary to cool the device

02)

Press the ENTER button to confirm the setting.

02)

6.6.6.6. Mode Setting

In this submenu you can select the control mode for the device.

01) Press the UP/DOWN buttons to select one of the 2 options:01)

• SELF: DMX data transfer is off•

• MAST: DMX data transfer is on.•

02) Press the ENTER button to confirm the setting.02)

Product code: 33045

Performer Fresnel 2200 DDT

Bekijk gratis de handleiding van Showtec Performer Fresnel 2200 DDT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.