Showtec Performer Fresnel 2200 DDT handleiding

Verlichting

Showtec

40 pagina's

PDF beschikbaar

Handleiding

6.6.2. Run Mode

In this menu you can select the control mode of the device.

01) Press the UP/DOWN buttons to select one of the 4 options:01)

• DMX 512: Operate the device with a light controller. The device becomes a master device•

• SLAVE: Operate the device as a slave device in a master/slave setup•

• DMMR: Operate the device with a dimmer pack•

• SENS: Operate the device with a dimmer pack and with a light controller. The device•

automatically switches to the control mode you use

02) Press the ENTER button to confirm the selection.02)

6.6.3. Power Mode

In this menu you can select the power mode. The options imitates HPL lamp properties.

01) Press the UP/DOWN buttons to select one of the 2 options:01)

• 575 W: This setting imitates the 575 W HPL lamp•

• 750 W: This setting imitates the 750 W HPL lamp•

02) Press the ENTER button to confirm the selection.02)

6.6.4.

Address

In this menu you can select the DMX starting address of the device.

01)

Press the UP/DOWN buttons to select the DMX starting address of the device (001–512).

01)

02) Press the ENTER button to confirm the selection.02)

6.6.5. Motor

In this menu you can reset the zoom motor.

01) Press the UP/DOWN buttons to select one of the 2 options:01)

• Yes: Reset the zoom motor. The zoom motor resets to the starting point (15°)•

• No: Do not reset the zoom motor•

02) Press the ENTER button to confirm the selection.02)

Product code: 33045

Performer Fresnel 2200 DDT

Bekijk gratis de handleiding van Showtec Performer Fresnel 2200 DDT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.