Showtec Performer Fresnel 2200 DDT handleiding

Verlichting

Showtec

40 pagina's

PDF beschikbaar

Handleiding

6.6. Main Menu Options

The main menu has the following options:

Static

Run Mode

Power Mode

Address

Motor

Setting

Calibration

Info

01)

Press the UP/DOWN buttons to navigate through the menu.

01)

02)

Press the ENTER button to open submenus.

02)

Note:

Some of the submenus require a password. The password is UP, DOWN, UP, DOWN.

6.6.1.

Static

In this menu you can manually adjust the intensity and beam angle of the light output. When this menu is

selected, the dimmer and zoom functions can also be controlled with the dimmer control knob (A) and the

zoom control knob (B).

01)

Press the UP/DOWN buttons to select one of the 2 options:

01)

• DIMMER: Adjust the intensity of the light, from OFF to high (0–100)•

• ZOOM: Adjust the zoom, from 15° to 60° (0–100)•

02) Press the ENTER button to confirm the selection.02)

03) Press the UP/DOWN buttons. As an alternative, press the correct control knob 2 times and turn the control03)

knob.

04) Press the ENTER button to confirm the settings.04)

Note:

When you use static mode, do not leave the Static menu. If you leave the Static menu, the device goes back

to the selected run mode.

Product code: 33045

Performer Fresnel 2200 DDT

Bekijk gratis de handleiding van Showtec Performer Fresnel 2200 DDT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.