Showtec Melodist Install handleiding
Handleiding
Je bekijkt pagina 11 van 32
4. Installation
4.1. Safety Instructions for Installation
Attention
Make sure that there is enough space for ventilation around the device.
• Do not block the ventilation openings. Without proper heat dissipation and air circulation, the internal•
components may overheat. This can result in product damage.
• Do not install near equipment that produces heat, for example amplifiers.•
4.2. Installation Site Requirements
• The device can be used only indoors.•
• The device can be mounted on a 35-mm DIN rail.•
• The maximum ambient temperature t
a
= 40 °C must never be exceeded.•
•
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
•
4.3. DIN Rail Mounting
The device can be mounted on a 35-mm DIN rail.
Make sure that the DIN rail is sufficiently secured to prevent it from becoming unstable or falling off.
To mount the device on a 35-mm DIN rail, follow the steps below:
01) Position the device on the DIN rail.01)
02) Push the DIN rail locks (10) to mount the device firmly on the DIN rail.02)
Figure 4
10
c
Product code: 50421
Melodist Install
Bekijk gratis de handleiding van Showtec Melodist Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Melodist Install |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3106 MB |
