Showtec IP Pixelstrip 40 handleiding
Handleiding
Je bekijkt pagina 17 van 24
5. Setup and Operation
5.1. Warnings and Precautions
DANGER
Electric shock caused by short-circuit
This device is IP65 rated.
• Do not expose the device to conditions that exceed the rated IP class conditions.•
• Keep the connectors sealed with the rubber caps when the connectors are not in use.•
• Do not connect the cables from above the connectors, if the device is installed outdoors. Make a ‘drip•
loop’ in the cable so that rain water cannot enter the device.
• Make sure that the cable run is not too heavy. A heavy cable run can cause damage to the connectors. If•
the connectors are damaged, their ingress protection (IP) can deteriorate.
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
5.2.
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an LED pixel bar. It can be installed indoors and temporarily
outdoors. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Connect the device only using the dedicated cables.
16
c
Product code: 44522
IP Pixelstrip 40
Bekijk gratis de handleiding van Showtec IP Pixelstrip 40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | IP Pixelstrip 40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2690 MB |
