Showtec AirDrive 2.4 IP handleiding
Handleiding
Je bekijkt pagina 19 van 28
5. Setup and Operation
5.1. Warnings and Precautions
DANGER
Electric shock caused by short-circuit
This device is IP65 rated.
• Do not expose the device to conditions that exceed the rated IP class conditions.•
• Keep the connectors sealed with the rubber caps when the connectors are not in use.•
• Do not connect the cables from above the connectors, if the device is installed outdoors. Make a ‘drip•
loop’ in the cable so that rain water cannot enter the device.
• Make sure that the cable run is not too heavy. A heavy cable run can cause damage to the connectors. If•
the connectors are damaged, their ingress protection (IP) can deteriorate.
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
5.2.
Setup Example
The AirDrive 2.4 IP, 3-pin XLR can be used in various setups. At least 2 devices are required: 1 to be used as a
transmitter and 1 to be used as a receiver.
Figure 8
18
c
Product code: 50266
AirDrive 2.4 IP, 3-pin XLR
Bekijk gratis de handleiding van Showtec AirDrive 2.4 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | AirDrive 2.4 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4009 MB |
