Showtec AirDrive 2.4 IP handleiding
Handleiding
Je bekijkt pagina 15 van 28
4.4.2. Mounting with Hook-and-loop Straps
You can mount the device to a tube (max. Ø 50 mm) with the supplied 2 hook-and-loop straps.
At least 2 persons are necessary to mount the device.
To mount the device, follow the steps below:
01) Thread the hook-and-loop straps through the hook-and-loop slots (14) to attach the device to the pipe01)
structure. Make sure that the device cannot move freely.
02) Secure the device with a secondary suspension, for example a safety cable. Make sure that the secondary02)
suspension can hold 10 times the weight of the device. If possible, the secondary suspension should be
attached to a supporting structure independent of the primary suspension. Put the safety cable through
the safety eye (12).
Figure 7
14
c
Product code: 50266
AirDrive 2.4 IP, 3-pin XLR
Bekijk gratis de handleiding van Showtec AirDrive 2.4 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | AirDrive 2.4 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4009 MB |
