Showtec ACT Par 200W RGBAL handleiding
Handleiding
Je bekijkt pagina 22 van 40
6.3. Control Panel
Figure 11
OLED display
ENTER button
DOWN button
UP button
MENU button
•
Use the MENU button to exit the current submenu, to return to the main menu and to return to the start
•
screen.
•
Use the UP/DOWN buttons to navigate through the menus and to select values and options.
•
•
Use the ENTER button to open the desired menu, to confirm the selection or to set the currently selected
•
value.
6.4.
Start-up
Upon start-up the display will show a splash screen with the name of the device:
Immediately afterwards, the display shows the start screen. The start screen provides information about the
control modes of the device and the temperature of the LEDs, for example:
Manual operation (from the menu) Manual operation (from the
manual controls)
12-channel DMX mode with starting
address 001
Note:
If no button is pressed, after 30 seconds of inactivity the display will turn off. Press any button to turn the display
on. Refer to the Display Settings (see 6.6.5. Display Settings on page 26) for more information.
21
c
Product code: 34065
ACT Par 200W RGBAL
A)
B)
C)
D)
E)
Bekijk gratis de handleiding van Showtec ACT Par 200W RGBAL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | ACT Par 200W RGBAL |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5061 MB |
