Showtec ACT Par 200W RGBAL handleiding
Handleiding
Je bekijkt pagina 16 van 40
4.7. Barndoor Installation
An optional barndoor (see 3.5. Optional Accessories on page 11) is available for use with the ACT Par 200W
RGBAL. To install the barndoor, follow the steps below:
01) Slide the spring-loaded barndoor clip (05) to the side and flip it backwards.01)
02) Insert the barndoor into the barndoor holders (04).02)
03) Pull the barndoor clip (05) downwards to release the spring-loaded screw. The barndoor will be locked in03)
position.
04) Secure the barndoor to the overhead structure with an appropriate secondary attachment, for example a04)
safety cable. Put the safety cable through the safety eye of the barndoor.
Note:
Make sure that the barndoor is locked in position with the barndoor clip before using the device.
Figure 8
15
c
Product code: 34065
ACT Par 200W RGBAL
Bekijk gratis de handleiding van Showtec ACT Par 200W RGBAL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | ACT Par 200W RGBAL |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5061 MB |
