Showtec ACT Par 200W RGBAL handleiding
Handleiding
Je bekijkt pagina 15 van 40
4.5. Angle Adjustment
You can adjust the angle of the device with the adjustment handle (08).
01) Turn the adjustment handle (08) counterclockwise to loosen it.01)
02) Tilt the device to the desired angle.02)
03) Turn the adjustment handle (08) clockwise to tighten it. Make sure that the device cannot move freely after03)
the adjustment handle (08) is tightened.
Figure 6
4.6.
Diffuser Installation
The ACT Par 200W RGBAL can be used as a spotlight, a medium flood or a soft beam by installing one of the 3
included diffusers: 30°, 50°, or 80°.
To install a diffuser, press the diffuser into the lens opening (03) of the device. Make sure that the diffuser is held
in position by the diffuser clip (02).
To remove the diffuser, press the diffuser clip (02). The diffuser can now be removed.
Figure 7
14
c
Product code: 34065
ACT Par 200W RGBAL
Bekijk gratis de handleiding van Showtec ACT Par 200W RGBAL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | ACT Par 200W RGBAL |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5061 MB |
