Handleiding
Je bekijkt pagina 12 van 23
AFTER SALES SUPPORT
Email: service@prolinkbrands.co.nz
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11
INSTALLATION
Note: If the exhaust is not vented either out of the window or into the Roof
space this unit will not effectively cool down the room.
If tipped more than 45°, allow the unit to sit upright for at least 24 hours
before start-up.
WARNING!
Install the unit in rooms that exceed 10 m².
Do not install the unit in a place where inflammable gas may leak.
Place the unit on a firm, level surface in an
area with at least 50cm of free space around
it to allow for proper air circulation.
Do not operate in close proximity to walls,
curtains, or other objects that may block air
inlet and outlet. Keep the air inlet and outlet
free of obstacles.
Never install the unit where it could be subject to：
> Heat sources such as radiators, heat registers, stoves or other
products that radiate heat.
> Direct sunlight
> Mechanical vibration or shock
> Excessive dust
> Lack of ventilation, such as cabinet or bookcase
> Uneven surface
ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air can
escape the room, the exhaust coming from the appliance contains waste heat
and moisture.
1. Connect the hose connector to one end of the
exhaust hose.
Bekijk gratis de handleiding van Sheffield PL616, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sheffield |
| Model | PL616 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2203 MB |