Handleiding
Je bekijkt pagina 66 van 75
English−66
Setup
Clone Setting Allows for exporting and importing some of the OSD menu settings between monitors. The settings are
saved on a USB storage device (formatted FAT16 or FAT32) connected to the monitor’s USB port.
USB Read: Imports the monitor settings from a connected USB ash drive.
USB Write: Exports the monitor settings to a connected USB ash drive.
TIP: • The settings are imported for all input terminals.
• This function is available only between models with the same name and same rmware version.
Picture Individually select each OSD menu function’s settings to import.
TIP: • The selection of which settings to copy is reset to default if the monitor’s main power is turned
off.
Audio
Input & Output
Schedule
Network
Protect
Setup
System
Copy Start Initiates import or export of the OSD menu settings.
Advanced
Power Indicator Turns on or off the LED that indicates the monitor is powered on and in active mode. The monitor’s power
LED will not glow when this setting is [unable].
Mute Setting Allows you to mute the monitor’s audio and video output.
TIP: • The Mute Setting is released in the following cases:
• Changing the input signal.
• Turning off/on the main power switch, or with the ⏻ button on the remote control or main unit.
• Returning the unit from power save.
• Changing the [Mute Setting], [Audio Mode], or when the volume is changed with the remote
control or main unit key.
• Changing the video signal (resolution/scanning frequency).
• [Video] and [Audio & Video] may not work depending on the application or MediaPlayer
contents.
• This function may not work depending on the application or MediaPlayer contents.
Audio Mutes the audio output when the remote control’s MUTE button is pressed.
Video Mutes the video output when the remote control’s MUTE button is pressed.
Audio & Video Mutes the audio and video output when the remote control’s MUTE button is pressed.
Command Format Select the command format. For details of each command, see the manual on the following website.
https://www.sharp-nec-displays.com/global/index.html
Control Terminal Selects control terminal in standby state, [RS-232C] or [Lan].
Monitor ID Sets the monitor’s ID number between 1 and 25. This number is also used by the remote control when in
ID mode.
TIP: • It is strongly recommended so that the monitor can be individually identied and controlled.
Reset Resets all setup menu settings back to factory setting, except for [App Icon Layout].
*
1
: The function is available only when connecting the optional sensor unit.
Application
Application
Manages the installed applications.
Bekijk gratis de handleiding van Sharp MultiSync ME862, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync ME862 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7928 MB |
