Handleiding
Je bekijkt pagina 17 van 75
English−17
7
HDMI 1/2/3 input terminal (HDMI1 (ARC)/HDMI2/
HDMI3)
HDMI signals input.
Please use an HDMI cable with the HDMI logo.
When input signal is 4K, please use high-speed HDMI
cable.
HDMI1(ARC):
Also supports ARC (Audio Return Channel) for audio
output.
ARC sends the monitor’s sound to audio equipment with
an HDMI1 ARC connector.
TIP: • Use the included ARC-supported HDMI cable. The
audio equipment will output the monitor’s audio.
The audio equipment can be controlled with the
included remote control.
• Some HDMI cables and devices may not
show an image correctly due to different HDMI
specications.
• This monitor supports HDCP (High-bandwidth
Digital Contents Protection) coding. HDCP is a
system for preventing illegal copying of video
data sent over a digital signal. If you are unable
to view material via the digital inputs, this does
not necessarily mean that the monitor is not
functioning properly.
• Compatible signal list is on the page 51.
8
USB Type-C port (power supply 5 V/3 A)
Check the shape of the connectors when connecting a USB
cable. When supplying power via the USB Type-C port, use
a USB cable supporting 3 A.
You can connect a device that supports DisplayPort
alternate mode. In order to supply power to connected
devices, it is necessary to support the Power delivery
standard.
NOTE: • Do not tie the USB cable. Otherwise, it may
cause overheating or re.
TIP: • The Power Delivery function is not guaranteed to
work with all devices. Please check the connected
device’s user manual and specications for its
power capabilities and requirements.
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB port, USB
Type C port and Audio output terminal. Use shielded cables with ferrite core to connect to the following terminals: HDMI input
terminal, RS-232C input terminal.
TIP: • Do not connect or disconnect cables when turning on the monitor’s main power or other external equipment’s power
as this may result in loss of image.
• Do not use an attenuating (built-in resistor) audio cable. Using an audio cable with a built-in resistor will lower the
sound level.
Before making connections:
• Turn off the device’s power before connecting it to the monitor.
• Refer to the device’s user manual for available connection types and instructions for the device.
• We recommend turning off the monitor’s main power before connecting or disconnecting a USB ash drive to avoid data
corruption.
• Check the USB ash drive for viruses as necessary.
Bekijk gratis de handleiding van Sharp MultiSync ME862, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync ME862 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7928 MB |
