Handleiding
Je bekijkt pagina 34 van 139
EN - 15
hob with the on/off key
3. Touch the ‘A’ and ‘B’buttons at the
same time for 2-3 seconds. Then the
default power limit will appear again.
4. Select the power limit by pressing the
‘+’ or ‘-‘ buttons.
5. Then press ‘A’ and ‘B’ buttons at the
same time for 2-3 seconds to set the
selected limit. Now the hob is ready to
use with the new power limit setting.
This setting can be made at any time
and is maintained until the next change
B
Residual Heat Indicator
The residual heat indicator indicates that
the glass ceramic area has a temperature
that is dangerous to touch.
After switching off the cooking zone, the
respective display will show “H” until the
corresponding cooking zone temperature is
at a safe level.
Smart Pause
Smart Pause, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the Smart Pause,
the heaters will automatically return to the
previous temperature level.
If the Smart Pause is not de-activated, the
cooktop will switch off after 30 minutes.
Press
to activate Smart Pause. The
power for the activated heater(s) will reduce
to level 1 and “II” will appear at all displays.
Press
again to deactivate Smart
Pause. “II” will disappear and the heaters
will now run at the level previously set.
Safety Switch-Off Function
A cooking zone will automatically switch off
if the heat setting has not been modified
for a specified duration of time. A change
in the heat setting of the cooking zone will
reset the time duration to the initial value.
This initial value depends on the selected
temperature level, as shown below.
Heat setting Safety switch off after
1-2 6 Hours
3-4 5 Hours
5 4 Hours
6-9 1.5 Hours
Child Lock
After switching on the appliance, the child
lock function can be activated. To activate
the child lock, simultaneously press the
increase heat setting button
and
decrease heat setting button and then
press the increase heat setting key
again. “L” indicating LOCKED will appear
on all heater displays and the controls
can not be used. (If a cooking zone is in
the hot condition, “L”and “H” will display
alternately).
The hob will remain in a locked condition
until it is unlocked, even if the appliance
has been switched off and on.
To deactivate the child lock, first switch on
the hob. Simultaneously press the increase
heat setting button
and decrease
heat setting button and then press the
decrease heat setting button again. “L”
will no longer be displayed and the hob will
switch off.
Key Lock
The key lock function is used to set
‘safe mode’ on the appliance during
operation. It will not be possible to make
any adjustments by pressing the buttons
(for example heat settings). It will only be
possible to switch the appliance off.
The lock function is active if the key lock
button
is pressed for at least 2 seconds.
This operation is acknowledged by a
buzzer. After successful operation, the key
lock indicator will flash and the heater will
be locked.
Timer Function
The timer function is available in two
versions, as follows.
6.
A
B ON/OFF
Bekijk gratis de handleiding van Sharp KH-6I37FT0K-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KH-6I37FT0K-EU |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11713 MB |
