Handleiding
Je bekijkt pagina 20 van 29
EN - 19
sound. The symbols “ A ” and “ ” will
flash.
Turn both control knobs to the “0” position
and press any key on the timer to stop the
warning sound. Press “
” for 2 seconds
the
“A ” symbol will disappear and the timer will
switch back to manual function.
Semi-Automatic Time Adjustment
(Finishing Time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “
” until you see “End” and
symbol on the display screen. “ ” and the
current time of day will flash.
3. Use the “+” and “-” buttons to set the
desired finishing time.
4. The current time will reappear on the
screen, the symbols “
” and will remain
illuminated.
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbol “
” and will flash.
Turn both control knobs to the “0” position
and press any key on the timer to stop the
sound. Press “ ” for 2 seconds the “ ”
symbol will disappear and the timer will
switch back to manual function.
Full-Automatic Programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “
” until you see “dur” symbol on
the screen. The symbol “ ” and will flash.
3. Select the desired cooking time period
using the “+” and “-” keys.
4. Press “
” until you see “end” and
symbol on the screen. The time and the
symbols “ ” and will flash.
5. Select the desired finishing time using
the “+” and “-” keys. Add the cooking period
to the current time of day. You can set a
time of up to 10 hours after this.
6. The current time will reappear on the
screen, and the symbols “
” and will
remain illuminated.
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbols “
”,“ ” and “ ” will flash.
Turn both control knobs to the “0” position
and press any key to stop the sound. Press
“ ” for 2 seconds the “ ” symbol will
disappear and the timer will switch back to
manual function.
The cooking end time cannot be set
when the grill functions are activated. If
the cooking end time was set before
activating the grill functions, the cooking
end time will be canceled after the grill
functions are selected.
Sound Adjustment
Press and hold the “-” sensor button until
you hear an audible 'beep' sound. After
this, each time the “-” button is pressed,
a different 'beep' tone will sound. There
are four different types of signal sounds. If
"off" is selected, all sounds will be turned
off except alarm and error sounds press
any buttons. After a short time the selected
beep will be recorded.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the PLUS
and MINUS sensor buttons for 2 seconds
until you see Key Lock symbol on the
display. To deactivate the key lock, touch
the PLUS and MINUS sensor buttons
for 2 seconds until the key lock symbol
disappears from the display.
Bekijk gratis de handleiding van Sharp KA-74Z68BNH-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KA-74Z68BNH-EU |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2413 MB |
