Handleiding
Je bekijkt pagina 20 van 28
EN - 19
day,press and hold the THERMOSTAT ( )
sensor button for 5 seconds until there is
an audible signal sound. After that, different
signal sound will be heard each time the
PLUS and MINUS buttons next to the
thermostat button are pressed. There are
five different types of signal sounds. If "tn0"
is selected, all sounds will be turned off
except alarm and error sounds. Select the
sound you want and any other do not press
a button. After a short time the selected
beep will be recorded.
Boost Function
This function is used to shorten the
preheating time. You can preheat in Turbo,
Fan, Static or Pizza functions. In order to
preheat, it is sufficient to press the BOOST
(
) sensor after selecting the desired
cooking function.
Use this function to heat the oven the
desired temperature as quickly as possible.
This mode is not appropriate for cooking.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the PLUS
and MINUS sensor buttons for 2 seconds
until you see Key Lock symbol on the
display. To deactivate the key lock, touch
the PLUS and MINUS sensor buttons
for 2 seconds until the key lock symbol
disappears from the display.
When the key lock is engaged, only the ON/
OFF sensor button can be activated. All
other buttons will remain locked.
To make steam cooking;
Start your cooking by setting the function,
temperature and time according to the
food in the steam cooking table. For foods
not included in the table, you can set the
temperature, cooking function and time
yourself.
Place the food on the recommended shelf.
Fill the specified amount of water into the
water reservoir located in the oven panel
with the help of a container.
Tap the steam button ''
''on the control
screen.
The display will show "St 1".
Each time you press the "+" button, "St 2" ,
"St 3" and "Auto" will appear on the screen
respectively.
"St 1": means 100ml water, "St 2": means
200ml water, "St 3": means 300 ml water ,
"Auto": means 100 ml water.
When you press the steam button ''
'' again after selecting the steam amount,
the oven will automatically inject hot water
vapor directly onto a certain amount of
food.
If the "Auto" is selected, the oven starts the
steaming process automatically when it
reaches the set temperature.
Select the one that suits your food from
the steam cooking functions and adjust the
temperature setting.
Your food will be cooked more delicious
thanks to the steam support.
If you wish, you can add steam after
cooking starts. To do this, follow the steps
below;
Touch the steam button ''
''on the control
screen for 3 seconds.
"00:00" starts to flash on the clock screen.
If you want to add steam in the minute
of cooking, adjust the minute setting
accordingly with the "+" and "-" buttons.
Tap the steam button ''
'' again and select
the amount of water as described above.
After these operations,the determined
amount of hot water vapor will be
automatically inject directly onto a food.
4.5 aCCeSSorieS
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
5
6
4
3
2
1
T2
T1
• Insert the accessory to the correct
position inside the oven.
• Allow at least a 1 cm space between the
fan cover and accessories.
• Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
Bekijk gratis de handleiding van Sharp KA-73F68BNH-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KA-73F68BNH-EU |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2355 MB |
