Severin SC 7177 handleiding
Handleiding
Je bekijkt pagina 17 van 96
17
142 x 208 mm
8. After cleaning, switch off the appliance by pressing the button.
Attention! The appliance will keep running for a few seconds to absorb the remaining water.
When the appliance is used for extended periods or at high temperatures, the fan will switch on and off automatically to cool
the battery.
Right after each use
∙ Switch off the appliance after use, remove the clean and dirty water tanks and empty them.
∙ Clean the appliance as specied under Cleaning the appliance.
Cleaning the appliance
Self-cleaning function
∙ We recommend running the self-cleaning function after every use. The process takes about 5 minutes.
∙ Empty the dirty water tank.
∙ Fill the clean water tank with 400 ml of warm (max. 60 °C) tap water.
∙ Place the appliance onto the charging station and plug the power supply unit into the socket. Initiate self-cleaning by
pressing the
button on the handle.
∙ The appliance automatically cleans the brush roller and shuts off when the process is complete.
∙ Empty the water tank and leave it without the lid in place until the next use.
∙ Clean and store the dirty water tank and lters as described below.
∙ Remove any dirt from the charging station.
∙ If necessary, clean the brush roller as described below. Remove the brush roller and store it on the charging station.
Manual cleaning and cleaning the main unit
∙ Before cleaning the appliance, switch it off by pressing the button.
∙ For safety reasons, the main unit must never be cleaned with liquids or immersed in them.
∙ Cleaning the clean water tank
1. Press the clean water tank release button.
2. Remove the tank.
3. Remove the lid.
4. Empty the tank.
5. Store the appliance without the lid in place until the next use.
There is a round in the main unit below the clean water tank. You can remove this lter with tweezers and clean it under
running water if necessary. Then put the lter back in place. Never use the appliance when the lter is not in place.
∙ Cleaning the dirty water tank
1. Press the dirty water tank release button.
2. Remove the tank.
3. Remove the lid.
4. Remove the pleated lter.
5. Remove the eece lter.
6. Empty the tank and rinse it; clean the interior with the brush provided if necessary.
7. Clean the lid.
8. Rinse the pleated lter and clean it with the brush provided if necessary.
9. Rinse the eece lter.
10. Allow both lters to dry.
11. Store the tank, lid, pleated and eece lters disassembled until the next use.
Fit the eece lter provided and then the pleated lter in the lid before the next use. Never use the appliance without
the lters in place!
∙ Cleaning the brush roller
Push the slider to the side to release the brush roller; the lock will spring open.
Remove the brush roller and clean it under running water with a mild detergent. Then rinse thoroughly.
Use the knife to remove hair or lint trapped in the upper part of the cleaning brush. When doing so, move the blade
upwards out of the cleaning brush.
After cleaning, put the brush roller back on the charging station until the next use.
∙ Cleaning the main unit and charging station
Clean the housing around the brush roller with a damp cloth or the cleaning brush.
Bekijk gratis de handleiding van Severin SC 7177, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Severin |
| Model | SC 7177 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 8156 MB |
