Severin DK 1033 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192/ 92

Afdrukken

Je bekijkt pagina 14 van 92

14

104 x 142 mm

∙ Always remove the plug from the wall

socket

- after use,

- in case of any malfunction, and also

- before cleaning the appliance.

∙ When removing the plug from the wall

socket, never pull on the power cord;

always grip the plug itself.

∙ Do not let the power cord hang free.

∙ The power cord must be kept well away

from any hot part of the appliance.

∙ No responsibility will be accepted if

damage results from improper use, or if

these instructions are not complied with.

Start up

Before using the appliance for the rst time,

remove any remaining packaging and wipe

the surface with a damp cloth.

Suitable cookware

∙ This appliance must only be used with

cookware suitable for use with induction-

type hot-plates, eg stainless-steel with

a ferro-magnetic base, or cast-iron or

enamelled steel cookware.

∙ Cookware can be tested for its suitability

by simply holding a magnet to the base;

if the magnet is attracted, the cookware

is suitable for use with this appliance.

∙ Only at-bottom pots and pans may be

used.

∙ Do not use any cookware with a base

less than 2 mm thick.

∙ Never use pots with a diameter

greater than 22 cm and less than

18 cm.

∙ If unsuitable cookware is used, the

appliance will respond with an error

message (see ‘Troubleshooting’ table).

∙ Coated pots and pans may be

damaged by excessive heat. It is

therefore important to select the

appropriate temperature level for the

cookware in use, and to follow the

information provided by the cookware’s

manufacturer.

∙ A maximum load of 6 kg for either

cooking plate must not be exceeded.

Setting the power output / temperature

This appliance may be operated by

either of its control features, ‘Power’

or ‘Temperature’ . For heating water,

steaming and similar cooking applications,

we recommend using the ‘Power’

control. For frying, deep-frying and the

like, the ‘Temperature’ control should

be used.

Power

Press the operating key . The display

shows the default setting, 5 (left cooking

plate: 4). Using the + and – selection keys,

the power setting can be adjusted from 1

to 10 as required (left plate from 1-7, right

plate from 1-10).

Temperature

Press the operating key . The display

shows the default setting, 120. Using

the + and –selection keys, the required

temperature level can be selected in steps

of 20 °C within a range from 60 °C to

240 °C.

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192/ 92

Bekijk gratis de handleiding van Severin DK 1033, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Fornuis