Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 92 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 92 of 124
13.2.1 Wi-Fi firmware update
Updating the Wi-Fi firmware requires a PC with a USB port and the file containing the new firmware.
Wi-Fi firmware files are of the type:
file_name.glb
1
Turn on and connect the XPT800 Sound Level Meter to the
USB port of your PC using USB-C cable.
2
In SYS-FUNC/USB/PROCEDURES press FILE WRITE to activate
USB write (don’t exit the pop-up)
3
As soon as access to the memory unit is available, copy the
"new_firmware.glb" file to the folder > Firmware.
4
On the FILE WRITE pop-up press EXIT to deactivate USB write
5
Switch the instrument off and on again
6
In ICON MENU, press the SYS-FUNC icon to access the sys-
tem and measurement configuration menus.
7
Access the FW UPGRADE and PROCEDURES pages in suc-
cession.
8
Tap on LOAD NEW.
The device automatically reboots until the splash screen is displayed; the status LED starts blinking
blue. The Wi-Fi update procedure can take a couple minutes.
Verify the correct update of the new version as described in chapter “13.1 Firmware version” on page
90.
Info
In the case that the update cannot be carried out, e.g. due to a battery voltage below 3.8V, a
running measurement, or a missing correct .glb file, a pop-up alerts the user with a message.
Notice!
•
If the firmware update fails, the status LED flashes red five times, indicating a possible
error in the charging procedure...
•
The instrument has a recovery firmware pre-loaded in a non-editable memory area; to
restore the firmware, please refer to section “13.3 Instrument recovery via recovery
firmware” on page 93.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
