Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 90 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 90 of 124
13 Firmware update and options
The firmware, i.e. the program that manages all the instrument's functions, can be updated by transfer-
ring the file from a PC to the XPT800 via the USB-C ports. This allows the functionality of the instru-
ment to be updated.
To proceed with the update, use the FW UPGRADE function accessible from the SYS-FUNC icon.
Warning!
During the procedure the power supply status must be sufficient to perform the update.
• With external power supply, DO NOT remove the power cable until the firmware up-
date is complete.
• With battery power, the battery must be close to 100% to ensure that the boot-loader
functions are not interrupted and thus avoid possible FLASH memory write errors.
Info
The BL (boot-loader) accepts that there are also other files in the 'firmware' directory.
The files will be evaluated starting with the extension ".hex", then whether the attribute
"archive" is set, and finally the contents of the APP table "infoAPP" contained in the file.
If there is more than one file in the directory that meets these requirements, the first
one proposed by the file manager will be used for update.
13.1 Firmware version
To find out the firmware version installed in the instrument.
1
In the ICON MENU, press the SYS-INFO icon to access the
system information and monitor menus.
2
Tap to access the FIRMWARE page.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
