Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 69 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 69 of 124
10.3 Setting audio recording parameters
It is possible to set the instrument to record an audio signal while logging acoustic values. You can, in
addition, set parameters, such as the duration, bandwidth, and resolution of the audio recording.
1
In the ICON MENU, press the MEASURE icon to access the
measurement panel.
2
Tap on the context menu and successively select EDIT APP >
LOG > AUDIO and the parameter to be set:
•
Audio logging (Log_audio_mode);
•
Audio resolution (Log_audio_res);
•
Sampling rate (Log_audio_samp);
•
Audio format
•
Maximum duration (Log_audio_duration).
3
Set the desired parameters.
4
Press
to confirm, press X to cancel operation
.
10.3.1 Audio recording mode
By acting on the "Log_audio_mode" parameter, audio logging can be set to:
•
disabled (OFF): durante la registrazione dei dati non avviene nessuna registrazione audio;
•
continuous audio recording (CONT): the audio signal is stored without interruption until the
end of the measurement with datalogging.
•
event-driven audio recording (TRG); audio recording, during a measurement with datalogging, is
activated only when the set trigger condition is reached and is deactivated when the trigger con-
dition is no longer satisfied.
Continuous audio recording
During "continuous" audio recording, the audio signal is stored without interruption until the end of
the measurement.
Event-based audio recording
During "event-driven" audio recording, the audio signal is stored only when the set trigger condition
is reached and is deactivated when the trigger condition is no longer met. It is possible, during the
same measurement, to record another audio if the set trigger condition is met again.
To enable event-based audio recording, it is also necessary to set and activate the exceedances on the
desired parameter as well, as described in the chapter “9.7 Set alarms on exceedances” on page 60.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
