Senseca PRO 915-2 handleiding
Handleiding
Je bekijkt pagina 22 van 30
PRO 915-2 – Differential manometer / Thermometer
Page 22 of 30
8 Measurement adjustment
8.1 Pressure measurement
The measurement can be adjusted by setting the following parameters, available in the Pres-
sure sensor → Correction:
• Zero point: adds an offset (P
offs
) to the measurement.
Displayed value = Measured value + P
offs
• Gradient: applies a percentage correction (C
slope
%) to the measurement. Zero indicates
no correction.
Displayed value = (Measured value + P
offs
) * (1 + C
slope
% / 100)
If a measurement correction is applied by setting a value other than zero for the “Zero point"
and/or "Gradient” parameters, the cor symbol appears on the display.
8.2 Temperature measurement
The measurement can be adjusted by setting the following parameters, available in the Ther-
mocouple → Correction menu:
• Zero point: adds an offset (t
offs
) to the measurement.
Displayed value = Measured value + t
offs
• Gradient: applies a percentage correction (C
slope
%) to the measurement. Zero indicates
no correction.
Displayed value = (Measured value + t
offs
) * (1 + C
slope
% / 100)
• Surface: correction used for contact measurements. Applies a correction factor (C
∆t
) to
take into account the difference between the measured value and the ambient
temperature (t
CJ
, instrument cold junction). The value 1 indicates no correction.
Displayed value = T
CJ
+ (Measured value – T
CJ
) * C
∆t
The "Surface" factor can be used to correct the contact measurement of high
temperature bodies, so as to compensate for the heat loss due to the lower ambient
temperature.
If a measurement correction is applied by setting a value other than zero for the “Zero point"
and/or "Gradient” parameters, the cor symbol appears on the display.
Bekijk gratis de handleiding van Senseca PRO 915-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 915-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6427 MB |
