Senseca PRO 115 handleiding
Handleiding
Je bekijkt pagina 18 van 25
PRO 111 / PRO 115 – Pt100 thermometers
Page 18 of 25
8 Measurement adjustment
The Pt100 sensor can be characterized by entering the parameter R
0
(resistance at 0 °C) and
the coefficients A, B and C with the related exponents of the Callendar-Van Dusen equation
through the Pt100 → Calibration menu.
The measurement can be adjusted by setting the following parameters, available in the Pt100
→ Correction menu:
• Zero point: adds an offset (t
offs
) to the measurement.
Displayed value = Measured value + t
offs
• Gradient: applies a percentage correction (C
slope
%) to the measurement. Zero indicates
no correction.
Displayed value = (Measured value + t
offs
) * (1 + C
slope
% / 100)
If a measurement correction is applied by setting a value other than zero for the “Zero point"
and/or "Gradient” parameters, the cor symbol appears on the display.
Bekijk gratis de handleiding van Senseca PRO 115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5710 MB |
