Senseca ECO 420 handleiding
Handleiding
Je bekijkt pagina 21 van 26
ECO 420 series - Compact CO2 monitor with alarm
Error and system messages
B-H90.0.0X.DK2-4.1 Page 21 of 26
7 Error and system messages
Display
Meaning
Possible causes
Remedy
----
No signal from the
sensor
Measurement far
outside of the
measuring range
• Sensor not ready
• CO
2
concentration
too high
• Defective sensor
adjustment
• Sensor defect
Wait the start-up time of
the sensor
Place the device in clean
outdoor air
Perform sensor
adjustment
Send in for repair
----
The display value
could not be deter-
mined
• Sensor not ready
• Sensor defect
Wait the start-up time of
the sensor
Send in for repair
No display,
unclear
characters or
no response
when buttons
are pressed
Rechargeable battery
depleted
System error
Device is defective
• Rechargeable
battery depleted
• Error in the device
Charge or replace
rechargeable battery
Send in for repair
BAT LO
Rechargeable battery
depleted
• Battery discharged
• Battery defect
Charge battery
Replace rechargeable
battery
ERR.1
Measuring range
exceeded
• Measurement too
high
• Defective sensor
adjustment
• Sensor defect
Stay within allowable
measurement range
Perform sensor
adjustment
Send in for repair
ERR.2
Measuring range is
undercut
• Defective sensor
adjustment
• Sensor defect
Perform basic sensor
adjustment
Send in for repair
ERR.7
Sensor error
• Defective sensor
adjustment
• Sensor defect
Perform sensor
adjustment
Send in for repair
SYS ERR
System error
• Error in the device
• Sensor defect
Switch device on/off
Recharge or replace
rechargeable batteries
Send in for repair
Bekijk gratis de handleiding van Senseca ECO 420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 420 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2979 MB |
