Senseca ECO 420 handleiding
Handleiding
Je bekijkt pagina 20 van 26
ECO 420 series - Compact CO2 monitor with alarm
Operation and maintenance
B-H90.0.0X.DK2-4.1 Page 20 of 26
Caution! Damage!
If the rechargeable batteries have different charge levels, leaks and thus damage to the
device can occur.
Only use new, high-quality rechargeable batteries!
Do not use different types of rechargeable batteries!
Remove depleted rechargeable batteries and dispose of them at a suitable collection
point.
Note
Unnecessary unscrewing endangers the protection against moisture and should therefore
be avoided.
Read the following handling instructions before replacing batteries and follow them step by
step.
If disregarded, the device could be damaged or the protection from moisture could be
diminished.
1 Unscrews the Phillips screws (A)and remove the cover.
2 Carefully replace the two Mignon AA rechargeable batteries (B).
Ensure that the polarity is correct! It must be possible to insert the
batteries in the correct position without using force.
3 The O-ring (C) must be undamaged, clean and positioned at the
intended depth.
4 Fit the cover (D) on evenly without much force. The O-ring must
remain at the intended depth!
Check the position of the USB socket!
5 Tighten the Phillips screws (A).
Bekijk gratis de handleiding van Senseca ECO 420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 420 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2979 MB |
