Senseca ECO 410T handleiding
Handleiding
Je bekijkt pagina 10 van 22
ECO 410 / ECO 410T - O2-Analyser / oxygen meter
Operation
B-H86.0.31.DK2-2.1 Page 10 of 22
4 Operation
4.1 Opening the configuration menu
1 Press the Function button for 2 seconds to open the Configuration menu.
2 (ONF appears in the display. Release the Function button.
Parameter
Values
Meaning
INP
Auxiliary display (only available at ECO 410T)
%
02
No auxiliary display,
only display of the oxygen concentration in [vol. %]
m
80D
Auxiliary display:
maximum operational depth MOD in meter [m] sea
water (for explanation of MOD see #1).
FT
80D
Auxiliary display:
maximum operational depth MOD in feet [ft] sea
water (for explanation of MOD see #1).
P.ABS
Air pressure
500 .. 12000
Air pressure in [hPa] corresponds to [mbar]
(note explanation #2 )
PO2
Max. Oxygen partial pressure (only available at ECO 410T)
0.2 ... 1.6
Partial pressure in [bar]
(Observe extended notes #3 !!)
POFF
Shut-off time
OFF
No automatic shut-off
0:15, 0:30, 1:00, 4:00,
12:00
Automatic shut-off after a selected time in
hours:minutes, during which no buttons have been
pressed
L,TE
Backlight
OFF
Backlight deactivated
0:15, 0:30, 1:00, 2:00,
4:00
Automatic shut-off of the backlight after a select-ed
time in minutes:seconds, during which no buttons
have been pressed
Bekijk gratis de handleiding van Senseca ECO 410T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 410T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2524 MB |
