Senseca ECO 130 handleiding
Handleiding
Je bekijkt pagina 9 van 20
ECO130 - Thermocouple Quick Response Thermometer
Operation
B-H89.0.0X.DK2-2.1 Page 9 of 20
4 Operation
4.1 Opening the configuration menu
1 Press the Function button for 2 seconds to open the Configuration menu.
2 (ONF appears in the display. Release the Function button.
Parameter
Values
Meaning
POFF
Shut-off time
OFF
No automatic shut-off
0:15, 0:30, 1:00, 4:00,
12:00
Automatic shut-off after a selected time in
hours:minutes, during which no buttons have been
pressed
L,TE
Backlight
OFF
Backlight deactivated
0:15, 0:30, 1:00, 2:00,
4:00
Automatic shut-off of the backlight after a selected
time in minutes:seconds, during which no buttons
have been pressed
ON
No automatic shut off of the backlight
UN,T
Display unit
°(
Temperature display in °C
°F
Temperature display in °F
IN,T
Factory settings
NO
Use current configuration
YES
Reset device to factory settings.
After confirming with the function-button, the
display shows: IN,T DONE
4.2 Adjustment of the measuring input
The temperature input can be adjusted with the zero point correction and the gradient cor-
rection. If an adjustment is made, you change the pre-adjusted factory settings. This is
signaled with the display text T.OF or T.SL when switching on.
Bekijk gratis de handleiding van Senseca ECO 130, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 130 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2094 MB |
